OBD II Diagnostic Tool HD V3.0 for Truck

HD V3.0 for Heavy Duty Diagnostic Tool

FOR HEAVY DUTY TRUCK & CARS

TWO IN ONE

PRODUCT INTRODUCTION

HEAVY DUTY& OBDII DIAGNOSTIC TOOL HD V3.0 IS PROFESSIONAL AND POWERFUL TRUCK FAULT DIAGNOSTIC TOOL DEVELOPED BY ICARSOFT TECHNOLOGY INC. WITH 2.8” TFT LCD AND UNIQUE DIAGNOSTIC SOFTWARE OF TRUCKS IN COMPLIANCE WITH STANDARD PROTOCOLS(J1587,J1939 ANDJ1708), IT HAS 10 MODES OF OBD/EOBD CAN TESTS FOR A COMPLETE DIAGNOSIS, AND ALSO SUPPORT 6PIN&9PIN ADAPTER FOR SOME SPECIAL TRUCKS.

READ & CLEAR CODES FOR MULTI-SYSTEMS

DISPLAY LIVE DATA IN TEXT FOR EASY DATA REVIEW

BATTERY TEST ALLOWS YOU GETTING THE VOLTAGE OF BATTERY WITH OBD PORT BY THE HD V3.0

THE HD V3.0 CAN RECORD THE VEHICLE TEXTS HISTORY AND IDENTIFY THE VEHICLE INFORMATION AUTOMATICALLY. ALSO KEEP THE LIVE DATA INFORMATION.

PRODUCT FEATURES

1. Support all heavy duty trucks in compliance with standard protocols (J1587, J1939 and J1708).
2. Work on all cars, mini vans and light duty vehicles (OBDII & CAN) from 1996 on and latest – European, American and Asian.
3. Support all OBDII protocols: CAN, J1850 PWM, J1850 VPW, ISO9141 and KWP2000

Uniquely featured with battery power monitor function.

4. Troubleshooting tips guide technicians to the root of problems faster, saving diagnosis and repair time.
5. Read and erase generic codes (P0, P2, P3 and U0), manufacturer specific codes (P1, P3 and U1) and pending codes.
6. Easily determine the cause of the Check Engine Light (MIL) and turn off Check Engine Light (MIL), clear troubles codes and reset monitors.
7. Display DTC definition, freeze frame data, monitor and I/M readiness status (emissions) and vehicle information (VIN, CIN and CVN)
8. Read live O2 sensor test data.
9. Read PCM live data stream with graphic data Display.
10. Enhanced OBDII Mode 6.

11.Battery test allows you getting the voltage of battery with OBD port by the scan tool when the engine starts.

12. Multilingual menu and DTC definitions – English, German, Dutch, Spanish and French.
13. Software upgrade via computer

OBDII FUNCTION

1. Read Codes
2. Erase Codes
3. I/M Readiness -- I/M Readiness indicates whether or not the various emissions-related systems on the vehicle are operating properly and are ready for Inspection and Maintenance testing.
4. Data Stream
5. Freeze Frame -- When an emission-related fault occurs, certain vehicle conditions are recorded by the on-board computer. This information is referred to as freeze frame data. Freeze Data is a snapshot of the operating conditions at the time of an emission related fault.
6. O2 Sensor Test -- This option allows retrieval and viewing of O2 sensor test results for most

recently performed tests from the vehicle ' s on-board computer.

7. On-Board Monitoring -- This function can be utilized to read the results of on-board diagnostic

monitoring tests for specific components/systems.

8. Evap System Test -- The EVAP test function lets you initiate a leak test for the vehicle's EVAP system. Before using the system test function, refer to the vehicle's service repair manual to determine the procedures necessary to stop the test.
9. Vehicle Information -- The option displays the vehicle identification number (VIN), the calibration verification number (CVN), and other information of the test vehicle.

10.Retrieve generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes and pending codes

11.Turn off Check Engine Light (MIL), clear codes and reset monitors

12. Read live PCM datastream
13. Support CAN (Controller Area Network) and all other

14.Multilingual menu and DTC definitions- English, Spanish, and German, etc

15.Read pending DTCs

16.Read permanent DTCs

17. DTCs search
18. Supports most of the OBDII/EOBD test modes include: CAN, ISO9141, KWP2000, J1850 VPW and J1850 PWM.
19. Works on most of 2001 and later OBDII compliant PETROL European vehicles
20. Works on most of 2004 and later OBDII compliant DIESEL European vehicles
21. Works on most of 1996 and later OBDII compliant US and Asian vehicles
22. View & Graph Live Data in Color Graphing and blazing fast refresh rate for better graphing and live data readings.
23. Comprehensive Help, Including OBD Parameter, Mode Explanations & More.

PRODUCT SPECIFICATIONS

1.Display: 2.8” TFT LCD, 320*240 Pixels

5.Operating current: 150mA@12V (Typical)

2. Operating Temperature: 0°C~50°C
3. Power consumption: 1.8W (Typical)
4. Storage Temperature: -20°C ~70°C
5. Dimension: 142mm*90mm*22.5mm (L x W x H)
6. Operating Voltage: 9 ~ 28V